Feb. 05, 2020
Stainless steel mesh (mesh belt) is widely used in glass products industry, food processing industry, dehydrated vegetables, quick frozen food, powder metallurgy, metal heat treatment, drying line transportation, foam nickel reduction production line, washing machine, hoist, dryer, drying Machine, curing furnace. Each conveyor technology chain net, net belt. It is an indispensable and important accessory in automatic devices of various industries and modern automation lines.
What about the daily care of stainless steel fine mesh?
Custom stainless steel fine mesh supplier to share with you: The use of stainless steel fine mesh has become more widespread with the development of the economy. People are closely related to stainless steel in daily life, but many people understand the performance of stainless steel. Not much, know less about the maintenance of stainless steel. Many people think that stainless steel will never rust, and stainless steel has good corrosion resistance. The reason is that a passivation film is formed on the surface, which exists in nature as a more stable oxide. In other words, although the stainless steel is oxidized to different degrees according to the use conditions, it is eventually oxidized. This phenomenon is usually called corrosion.
The stainless steel surface is dusty and easy to remove dirt, and can be washed with soap, weak detergent or warm water. The trademarks and films on the surface of stainless steel are washed with warm water and weak detergent, and the binder components are washed with alcohol or organic solvents (ether, benzene). Grease, oil, and lubricating oil on the stainless steel surface are contaminated. Wipe clean with a soft cloth, and then clean with a neutral detergent or ammonia solution or a special detergent.
Stainless Steel Fine Mesh
Stainless steel fine mesh has bleach and various acids attached to the surface. Rinse immediately with water, then dip with ammonia solution or neutral carbonated soda water solution, and wash with neutral detergent or warm water. The surface of the stainless steel fine mesh has a rainbow pattern, which is caused by excessive use of detergent or oil. It can be washed away with warm water neutral detergent when washing. Rust caused by stainless steel surface dirt can be washed with 10% nitric acid or abrasive detergent, and can also be washed with special washing chemicals. As long as we use the right maintenance methods, we can extend the life of stainless steel and keep it clean, bright and gorgeous.
The corrosion-resistant parts of the stainless steel surface passivation film have a pitting reaction due to the self-excitation reaction, forming small pores, and the close proximity of chloride ions to form a strong corrosive solution, which accelerates the corrosion reaction rate. There is also intergranular corrosion cracking inside the stainless steel, all of which have a destructive effect on the passivation film on the stainless steel surface. Therefore, the stainless steel surface must be regularly cleaned and maintained to maintain its gorgeous surface and prolong its service life. When cleaning the stainless steel surface, care must be taken not to cause surface scratches. Avoid using bleaching ingredients and abrasive detergents, steel balls, grinding tools, etc. To remove the detergent, rinse the surface with clean water after washing.